Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateTrusted Garage Door Spring Repair for Marietta Homeowners
When a garage door spring snaps in Marietta, the door becomes dead weight. Most homeowners hear it happen before they see it – a bang like a gunshot from the garage, then a door that won’t lift more than a few inches. That noise is the torsion spring, the heavy coil mounted above the door that handles most of the lifting weight, giving out after thousands of open-and-close cycles. We’ve repaired and replaced garage door springs across Marietta since 2001, so we know exactly what that failure sounds like, what it costs to fix, and how dangerous the aftermath can be if you try to muscle the door open yourself. We also offer our Garage Door Spring Repair in Smyrna for homeowners just outside the city.
Garage door spring repair in Marietta typically runs $180 – $340, parts and labor included. Most jobs are done the same day, and a live person answers our phone 24/7. Call (912) 520-4208 and you’ll get a written price before any work begins – no door-step surprises, no pressure. That’s how Bramwell Garage Doors Marietta has always worked. The repair itself is not a DIY job. Torsion springs hold hundreds of pounds of tension, and one wrong move with a winding bar can cause serious injury. Marcus Ellery, who leads our Marietta team, will tell you the same thing: this is a job for a trained technician with the right tools and the right respect for what those springs can do.
Garage Door Spring Replacement
Garage Door Spring Replacement is the full swap-out of a spring that has reached the end of its rated cycle life. Most residential springs are designed to last between 10,000 and 12,000 cycles – roughly 7 to 10 years for a typical Marietta household that opens the door 3 to 4 times a day. When that count runs out, the metal fatigues and the spring snaps. You don’t just replace the broken side, either. We replace both springs on a double-spring door, because the second one is typically the same age and within weeks of failing too. A single-spring replacement on a double-spring door just creates another breakdown waiting to happen. The cost for a full spring replacement in Marietta runs $180 – $340, depending on the spring’s wire gauge, coil diameter, and cycle rating.
When to Replace, Not Repair
Springs that snap or show visible gaps in the coil cannot be repaired. They must be replaced. If your spring is stretched, rusted, or older than seven years, replacement is the only reliable fix – patching a tired spring only moves the problem a few weeks down the road.
We carry multiple spring sizes and cycle ratings on the truck, so most replacements happen in one visit. The technician measures the old spring, matches it to the correct gauge and length, and confirms the door balances before he leaves.
What Replacement Includes
Every spring replacement at Bramwell Garage Doors Marietta includes both springs on a double-spring system, new cables if they show wear, and a full balance test of the door. The written price you approve before the work starts includes everything – there are no add-on fees at the end.
The 365-Day Done Right Promise covers the new springs in writing. If a covered repair fails within the guarantee period, we come back and fix it at no charge.
Styles & brands we work with
Garage Door Torsion Spring Replacement
Garage Door Torsion Spring Replacement is the most common garage door repair we perform in Marietta. Torsion springs are the horizontal coils mounted on a bar above the closed door. They work by twisting, not stretching – the twisting stores mechanical energy that offsets the door’s weight, making a 150-pound door feel like it weighs 15. When a torsion spring breaks, the garage door opener motor alone cannot lift the door, and forcing it will burn out the opener’s drive gear or bend the top panel. In Marietta, where summer heat and humidity can accelerate metal fatigue, we see torsion springs fail more often on west-facing garages that bake in afternoon sun. Our Kennesaw Garage Door Spring Repair team reports the same pattern on homes facing the afternoon sun there. A torsion spring replacement runs $180 – $340, parts and labor included, and we stock the common wire gauges and coil diameters on our service trucks.
Cycle Rating Upgrades
Not all torsion springs are equal. A builder-installed spring often lasts 10,000 cycles – roughly seven years. When we replace a torsion spring, we can fit a higher-cycle spring rated for 20,000 to 30,000 cycles, which usually adds $30 to $60 to the job and roughly doubles or triples the lifespan. For a homeowner planning to stay in their Marietta home another decade, that’s the smarter buy, and Marcus will tell you why in plain terms.
This is not a repair we recommend doing without a trained technician. The winding process alone requires calibrated winding bars and a specific technique. We’ve corrected plenty of DIY torsion spring attempts where the spring slipped and dented the door or a cable snapped and whipped across the garage. The savings never justifies the risk.
Same-Day Torsion Work
Because we carry springs on the truck, most torsion spring replacements are completed the same day you call. We tell you the arrival window when you book, and we show up in it. No vague four-hour blocks that turn into eight.
The technician presents a written price after inspecting the spring, before loosening a single bolt. The number you approve is the number on the invoice – no exceptions, on any job.
Broken Garage Door Spring
A broken garage door spring is the leading cause of a garage door that won’t open in Marietta. The telltale sound is a loud crack or pop from the garage, often mistaken for a car backfiring or something falling off a shelf. After that, the door either stays shut, opens a few inches and stops, or hangs crooked in the tracks because only one side is supported. Here’s what matters: the spring holds tension even after it breaks, and so does the cable still attached to it. People get hurt every year trying to lift a door with a broken spring, then releasing it or getting a hand pinned when the cable lets go. The repair itself is straightforward for us – $180 – $340 for a standard spring replacement in Marietta – but it is not a job to improvise.
Symptoms That Confirm a Break
Look at the spring above the closed door. A broken torsion spring has a visible gap in the coil, usually two to four inches wide. On extension spring systems, the spring on one side will be dangling in two pieces instead of one continuous coil with a safety cable running through it.
If the opener runs but the door doesn’t move, and you’ve ruled out a disconnected trolley, the spring is almost certainly the culprit. Continuing to press the opener button just strains the opener motor, which is a more expensive repair you don’t want to add on top.
Why the Door Is Dangerous Right Now
A garage door with a broken spring is not just stuck – it is unstable. The full weight is no longer counterbalanced, which means the door can drop suddenly if a cable slips or a track roller comes out of alignment. That’s hundreds of pounds falling with nothing holding it back.
If you need to get a car out, do not disconnect the door from the opener and try to lift it by hand. Call us instead. We answer live 24/7 at (912) 520-4208, and we’ll get a technician to your Marietta home fast, usually the same day.
Garage Door Extension Spring
A garage door extension spring is the older design you’ll find on many Marietta homes built before the early 2000s, and still common on smaller single-car doors and carriage-house styles. Extension springs mount above the horizontal tracks on both sides of the door and stretch as the door closes, storing energy by expanding rather than twisting. We handle extension and torsion spring repairs throughout the area, including our Garage Door Spring Repair in Powder Springs. They are simpler and cheaper than torsion springs, but they fail differently. When an extension spring breaks, the pieces can fly across the garage unless a safety cable runs through the center of the coil. Part of what we check on every extension spring repair is whether that safety cable is present and properly anchored, because if it’s missing, a broken spring becomes a projectile. Replacement in Marietta runs $180 – $340, same as torsion work, and we always replace both springs at once to keep the door lifting evenly.
Extension vs. Torsion: Which You Have
Stand inside your garage and look up. If you see a single coiled spring mounted horizontally on a bar above the closed door, that’s torsion. If you see two skinny springs running along the tracks on either side of the door, those are extension springs.
Extension springs are still sold and serviced, but when the time comes to replace them, many Marietta homeowners choose to convert to a torsion system. Torsion springs are safer, smoother, and quieter. We can quote both options on the same visit so you’re deciding with real numbers, not guesswork.
Safety Cables Are Not Optional
Every extension spring should have a safety cable running through its center and anchored to the track at both ends. If your extension spring doesn’t have one, a break can send the spring or its parts flying with enough force to cause a serious injury or put a hole in a car windshield.
On every extension spring job, we inspect the cables, pulleys, and mounting hardware. The written price we give you covers any safety upgrades needed, so there’s no surprise line item at the end.
Garage Door Spring Installation
Garage Door Spring Installation covers more than just replacing a broken part – it’s the correct sizing, winding, and balancing of a new spring system, whether for a brand-new door or a spring conversion on an existing one. The most common installation we do in Marietta is the replacement of an old extension spring setup with a torsion system, which improves reliability and safety overnight. A new torsion spring starts around $180 – $340 depending on the weight of the door and the spring’s cycle rating. For a new-door installation, the springs are included in the door package and specified by the door manufacturer – Chamberlain, Genie, Clopay, and Amarr all publish spring requirements for their doors, and we follow those specs exactly.
Correct Sizing Matters
A spring that’s too weak can’t lift the door, and a spring that’s too strong slams it upward. The sizing formula uses door weight, drum size, and cable length – three measurements we take on site, every time. Even a 20-pound difference in door weight changes the spring spec.
When a spring is correctly sized, the door should sit still halfway up – no drifting up, no creeping down. We test this before we leave, and we walk you through the balance test so you can confirm it yourself.
Installation on New Doors
If you’re replacing the whole door, the spring installation is part of the job, but it’s still the part that determines how the door feels for years. We install the springs to the manufacturer’s cycle spec, then adjust the opener force settings so the motor isn’t fighting the door.
We service doors from Clopay and Amarr regularly in the Marietta area, so we know the spring configurations those brands ship with and the common weak points that show up after a few years of Georgia weather.
Garage Door Spring Adjustment
Garage Door Spring Adjustment is the fine-tuning of a functioning spring system to restore the correct door balance. Springs lose a small amount of tension over time, especially in Marietta’s humidity swings, which can cause the door to feel heavy, drift up when opened halfway, or make the opener strain. An adjustment involves adding or removing tension on the spring – measured in quarter-turns or full turns, depending on the spring type – until the door balances properly. It’s a smaller job than a full replacement and typically costs $120 – $180 in Marietta, though if the spring is old or visibly worn, we’ll tell you honestly when adjustment won’t hold and replacement is the better spend. We don’t adjust a spring for the sake of a quick call-out; we adjust it only when the spring still has life left in it.
Signs an Adjustment Is All You Need
If the door opens but feels heavy at the bottom, or if it closes with a jolt rather than settling softly on the floor, the spring may just need a tension adjustment. These are tune-ups, not failures – the spring is still intact, just slightly out of spec.
Adjustment is also common after a new door installation, when the spring settles in the first few weeks. We include a follow-up balance check on new installations, and if the door needs a quarter-turn of adjustment, that’s covered. The price is quoted before we touch anything.
The Tooling We Use
Torsion spring adjustment requires winding bars of the correct size for the cone – too small and the bar slips, too large and it won’t seat. We carry full sets on the truck, along with a spring gauge to read the wire thickness and confirmed torque on every winding.
Every adjustment ends the same way: door opened halfway, hands off, watching for drift. If it holds still, balance is right. If it moves, we correct it before we pack up. There’s no ‘good enough’ version of this test.
Brands We Service
We see every major garage door brand in Marietta, but the names that show up most are Chamberlain, Genie, and Clopay. We’ve replaced torsion springs on Chamberlain openers and door systems for years, and we’re familiar with the spring sizes their common residential models call for – from lightweight aluminum doors to heavy wood carriage doors. We keep the most common Chamberlain spring gauges on the truck so a repair doesn’t get delayed by a parts run.
Clopay doors are what we’d call the workhorse of the Marietta suburbs – they’re on a huge share of the homes we visit, and their spring and cable setups are consistent across models. Amarr doors come through the shop less often but call for a slightly different spring spec on some of their carriage series, and we stock those as well. Genie springs and openers round out the mix, especially on older homes that haven’t been updated in a while. Whether you have Clopay, Amarr, Chamberlain, Genie, or any other make, the spring is still a spring – and we can match it, size it, and have it lifting smoothly the same day.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- A loud bang or snap from the garage. That’s the sound of a spring letting go. It’s a violent, metal-on-metal sound, not a creak. When you hear it, the door has lost its counterbalance and is no longer safe to operate. The spring needs replacement before the door moves again.
- The door opens a few inches and stops. The opener is trying to lift a door that’s now too heavy for it after one spring broke. Every extra attempt strains the opener’s gear and sprocket, which is a separate $120 to $320 repair in Marietta you can avoid by stopping now.
- You can see a gap in the spring coil. A broken torsion spring shows a clear two-to-four-inch split in the coil above the door. There’s no fixing that spring – it’s done. The gap also means the remaining spring (if there is one) is now carrying double the load.
- The door is crooked or jerks on the way up. One side is lifting and the other isn’t, which usually points to a broken or weakened spring on one side. Continuing to run the door this way will twist the door frame and can pop a roller out of the track.
- The door slams down instead of closing gently. When spring tension is set wrong or the spring is worn, the door drops on the way down instead of being lowered. That’s dangerous for anyone underneath it, and it will eventually bend the bottom panel or crack the concrete.
Our Process, Step by Step
- 1
You call and a live person answers. No directory, no voicemail tree, no ‘we’ll call you back next business day.’ We answer 24/7, including nights, weekends, and holidays. The person on the phone listens to what’s happening with your door, asks the right questions, and gives you a real arrival window – not a four-hour guess.
- 2
A uniformed, background-checked technician arrives on time. You know the name and you know the truck. Our technicians pull up in a clearly marked Bramwell vehicle, introduce themselves at the door, and walk with you to the garage to see the problem together.
- 3
Inspection and a written price. The technician examines the spring, cables, drums, and door balance, then writes down an exact price for the repair. That number includes parts, labor, and any fasteners or hardware needed. You approve it before a tool leaves the truck. That’s the Kingswell Way, and it’s how we’ve operated since 2001.
- 4
The repair is done right the first time. For a spring replacement, the technician matches the old spring’s wire gauge and coil diameter, winds the new spring to the correct number of turns, checks the door’s balance at mid-height, and cycles the door through several full open-and-close tests. The goal before we leave: a door that lifts with one hand and closes without a thud.
- 5
Clean-up and a written guarantee. We leave the job site cleaner than we found it – no old spring coils, grease spots, or packaging left behind. Before the technician leaves, you’ll have a written guarantee that spells out exactly what’s covered and for how long. If the repair fails inside the guarantee period, we come back and fix it at no charge. That’s the 365-Day Done Right Promise, and it’s on paper, not just spoken.
How Much Does Garage Door Spring Repair Cost in Marietta?
A typical garage door spring repair in Marietta runs $180 – $340 for a standard residential door, parts and labor included. That range covers a single torsion spring replacement at the lower end and a full double-spring replacement with higher-cycle springs at the upper end. Extension spring jobs fall into the same range, with conversion from extension to torsion sitting at the top of it. Here’s the honest breakdown: the spring itself is a $40 to $90 part depending on gauge and cycle rating. The rest of the cost is labor – specifically, the expertise required to wind a torsion spring safely and correctly, and the time to size, install, and balance it. Related repairs land in their own ranges: track realignment in Marietta runs $120 – $240, cable repair $130 – $250, and roller replacement $110 – $220. If your opener has been damaged by months of running against a broken spring, opener repair runs $120 – $320.
What affects your final number: door weight (a heavy wood door needs a heavier-gauge spring), spring cycle rating (a 20,000-cycle spring costs more upfront and lasts twice as long), and whether you have one spring or two. To avoid overpaying, get the written price before work begins and ask what you’re buying for it – our technicians will tell you the spring’s cycle rating and show you the old part. A free estimate should include the spring spec, the labor, and the guarantee in writing. That’s exactly what we provide, every time. Call (912) 520-4208 and ask Marcus or the team for an exact quote. Estimates are free, and no work starts until you’ve approved the number.
Our Service Area Near Marietta
Our technicians run routes across Marietta and the surrounding communities every day: Smyrna, Kennesaw, Vinings, Mableton, Powder Springs, Doraville, North Decatur, Fair Oaks, and Acworth. If you’re in Fair Oaks near the square or Mableton down by the river, you’re well within our normal coverage. Typical response time for spring repairs in Marietta is same-day, and we give you a firm arrival window when you book. Whether you need Garage Door Spring Repair in Dallas or Garage Door Spring Repair in Roswell, a Bramwell location near you works to the same Kingswell standard. This page is for Garage Door Spring Repair in Marietta, and our home page covers our full range of garage door services.
Serving Marietta, GA - Our Local Coverage Area
We’re based in the Marietta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Garage Door Spring Repair in Marietta
Garage door spring repair is the process of replacing or adjusting the springs that counterbalance the door’s weight, so the opener can lift it with minimal strain. In Marietta, most spring repairs are replacements, because a spring that snaps or wears beyond its cycle life cannot be repaired – it must be swapped for a new one. The job involves removing the old spring, installing a correctly sized new one, and balancing the door so it sits still halfway up. At Bramwell Garage Doors Marietta, every spring repair comes with a written price before work starts and a written guarantee when the job’s done. We also provide Garage Door Spring Repair - Marietta homeowners can count on for same-day service.
A standard spring replacement in Marietta takes about 45 to 90 minutes on site. Single-spring jobs on a standard residential door run closer to the shorter end, while double-spring jobs or extension-to-torsion conversions run closer to 90 minutes. You don’t need to take a whole day off – we give you a firm arrival window when you book, and we show up in it.
Spring repair in Marietta runs $180 – $340, parts and labor included, depending on door weight, spring type, and cycle rating. Related repairs are separately priced: cable repair $130 – $250, roller replacement $110 – $220, and track realignment $120 – $240. The price is quoted in writing before any work starts, so the number you approve is the number you pay. Call (912) 520-4208 for a free exact quote.
Yes, we service Chamberlain garage doors, including their spring systems and openers. We also work on Genie, Clopay, Amarr, and Wayne Dalton equipment across Marietta. We carry the common spring sizes and gauges these brands use, which is what makes same-day repair possible on most calls.
Yes, we offer same-day spring repair in Marietta, and we answer the phone 24 hours a day, 7 days a week, including holidays. When you call (912) 520-4208, a live person books the job and gives you an arrival window. Our technicians carry springs, cables, and rollers on the truck, so most repairs finish the same day without a parts delay.
Yes, every spring repair is covered by the 365-Day Done Right Promise and the written Kingswell Guarantee. If a covered repair fails within the guarantee period, we come back and fix it at no charge. The guarantee is delivered in writing after the job, and it spells out exactly what’s covered and for how long – no fine print surprises.
Clear the area around the garage door opener and the walls beside the door so the technician has room to work, and remove any vehicles if the door won’t open. Don’t try to open or close the door after the spring breaks, and don’t disconnect the opener or remove any cables. The technician handles all of that safely. If the door is stuck open, that’s fine – we’ll work around it.
Schedule Your Garage Door Spring Repair Service in Marietta Today
A broken garage door spring doesn’t wait for a convenient time, and neither do we. Call (912) 520-4208 right now and you’ll reach a live person who can have a technician at your Marietta home today. You’ll get a written price before any work starts, and the repair is backed in writing. Free estimate, no obligation – just a door that works again.