Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in Marietta?
In Marietta, replacing a single garage door panel typically costs $250 – $500 for the panel and installation combined, depending on the panel size, material, and whether the damaged section sits at the top, middle, or bottom of the door. Most panel replacements in the Marietta area are completed in one visit, often within an hour or two. If only one panel is damaged, replacement is nearly always cheaper than buying a new door, which runs $700 – $2,200 in Marietta.
Before you call around for quotes, it helps to know exactly what you’re paying for. This guide breaks down panel replacement pricing in Marietta for 2026, what drives the cost up or down, and how the Kingswell Guarantee changes what you should expect from any garage door company you invite to your home.
Key Takeaways
- Single panel replacement in Marietta: $250 – $500, parts and labor included.
- Replacing multiple panels usually makes more sense as a full panel replacement job or a new door installation at $700 – $2,200.
- Panel material, size, and insulation are the three biggest price drivers in the Marietta market.
- Bramwell Garage Doors Marietta gives you a written price before any work starts, so the quote you get on the phone is the number on the invoice.
- Every panel replacement is covered by the 365-Day Done Right Promise in writing.
Panel Replacement Cost Breakdown (2026)
Here is a realistic breakdown of what panel replacement costs in Marietta right now. These ranges reflect what homeowners across Cobb County, from East Cobb to Powder Springs, are paying in 2026:
| Line Item | Typical Cost in Marietta |
|---|---|
| Standard steel panel (single) | $120 – $260 |
| Insulated steel panel (single) | $180 – $340 |
| Labor (panel swap, alignment, balance check) | $100 – $190 |
| Disposal of damaged panel | $30 – $60 |
| Total: single panel replacement | $250 – $500 |
| Two adjacent panels replaced together | $450 – $850 |
| Full new door install (if multiple panels are damaged) | $700 – $2,200 |
Those line items are not padded. A plain, non-insulated steel panel is the cheapest to replace. An insulated panel with a polyurethane or polystyrene core costs more, and in Marietta’s climate, the insulation affects how much conditioned air stays in your garage during the humid summers. Marcus Ellery, who leads the Bramwell Garage Doors Marietta team, notes that a lot of homeowners in the area choose insulated panels when replacing a panel on an attached garage because it keeps the room above the garage cooler in August.
The labor range covers more than just unscrewing the old panel and fitting the new one. The technician should also check the door’s balance, inspect the rollers and hinges on that section, and confirm the door still travels straight on its tracks. If a panel has been dented badly enough to need replacing, the force that dented it often nudged something else out of alignment too.
What Affects Panel Replacement Pricing in Marietta
- Panel material. Steel is the most common door material in Marietta and the most affordable to replace. Aluminum panels cost slightly more, and wood or wood-composite panels are the priciest, especially on custom doors in older East Cobb neighborhoods where doors were built to match the home’s trim.
- Insulation. Non-insulated panels are thinner and cheaper. Insulated panels, which have a foam core, run higher. In Marietta, where summer humidity pushes garage temperatures into the 90s for months, insulated panels are a popular upgrade even on a single-panel repair.
- Position on the door. Bottom panels are the most commonly damaged, because they sit closest to the driveway and take hits from cars, kids’ bikes, and lawn equipment. Replacing a bottom panel is straightforward, but if the bottom panel is also where the lift cable attaches, the technician needs to re-secure the cable correctly. That step takes a few extra minutes but should not add a meaningful charge.
- Door brand and age. If your door is a Clopay, Amarr, or Wayne Dalton model from the last 15 years, matching panels are usually available. On older doors, or discontinued models, finding an exact match can be harder. If the panel cannot be color-matched or the embossed pattern no longer exists, the cost conversation shifts toward replacing multiple panels or the whole door.
- Single vs. double door width. A panel for a double-wide, two-car garage door runs higher than one for a single-car door because of the extra steel. Most single panels in Marietta fall in the $120 – $260 bracket for a single car door; a double-wide panel can push toward the top of, or slightly above, that range.
- Extent of the damage. A clean dent in one panel is one thing. If the impact bent the hinge brackets or cracked the stile, the repair involves more than the panel. A good technician will catch that during the inspection and put it in the written quote, not spring it on you after the work starts.
How Much Does It Cost to Replace a Single Garage Door Panel vs. a Full Door?
Replacing one panel costs $250 – $500 in Marietta. A full new door runs $700 – $2,200 installed. So the question is not just cost, but how well the new panel will match the rest of the door.
If the door is under ten years old and from a major brand like Clopay, Amarr, or Wayne Dalton, a single panel replacement is usually the right call. The color and pattern can be matched, and the door will look nearly seamless. If the door is older, faded, or from a discontinued line, a new panel may stand out noticeably. In that case, some homeowners in Marietta choose to live with a slightly mismatched panel and save the larger expense, while others decide it is time to replace the whole door. Either way, the right first step is getting a technician to look at the door in person and give you a written price for both options.
Bramwell Garage Doors Marietta does not charge to come out and give an estimate. Marcus Ellery and the team will tell you straight: if one panel is worth fixing, they will fix it. If the better value is a new door, they will say so and write up the numbers for both.
Can You Replace Just One Panel on a Garage Door?
Yes, absolutely. Most panel replacements in Marietta are single-panel jobs, done same-day or next-day. The one caveat is matching. Steel panels are stamped with a specific embossed pattern, and that pattern changes across brands and model years. A panel from the same manufacturer, in the same color and width, will match well. If the exact panel is no longer made, the technician should be honest about what a replacement will look like before any work is scheduled.
If you call home to Bramwell Garage Doors Marietta at (912) 520-4208, the person who answers is a real person, 24 hours a day. Tell them the brand, color, and approximate age of your door, and they will tell you whether a panel match is likely.
What to Expect From a Panel Replacement in Marietta
Here is how the process works when you schedule a panel replacement with Bramwell Garage Doors Marietta:
- You call and describe the damage. A live person answers, day or night. They will ask about the door’s brand, approximate age, and whether the panel is dented, cracked, or rusted through.
- A technician arrives within the stated window. You will not be waiting around all day. The arrival window is real, and the technician shows up in uniform, driving a marked vehicle.
- The technician inspects the door and writes the price. Before any work starts, you receive a written price. It covers the panel, the labor, and the disposal. That price does not change at the door.
- The panel is replaced and the door is rebalanced. The technician removes the damaged panel, installs the new one, and checks the door’s balance, spring tension, and track alignment. A garage door that travels unevenly after a panel replacement has not been done right.
- The job site is left clean. The old panel goes out to the truck, not in your driveway or at the curb for you to deal with.
- You receive the written guarantee. Every panel replacement includes the 365-Day Done Right Promise. If the repair fails within a year, Bramwell comes back and makes it right at no charge. That promise is in writing, not just spoken at the door.
That last step is the one Marietta homeowners tell us matters most. The Kingswell way of running a job is built on four promises: a written price before any work starts, a real arrival window, a clean job site, and a written guarantee on every repair. Each one protects you from the no-show, price-switch, and six-week-failure experiences that drive so many people to search for a new garage door company in the first place.
How to Save on Panel Replacement in Marietta
Panel replacement is already the budget-friendly option compared to a full door, but a few practical steps keep the cost at the low end of the range:
- Address the damage quickly. A dented panel can usually be replaced on its own. If you wait, the dent can spread, crack the panel, or damage the hinges and rollers, which adds to the final bill.
- Know your door’s brand and model. The sticker on the inside of the door or the side of the track usually lists the manufacturer and model number. Sharing that over the phone helps the technician arrive with the right panel or know whether one can be sourced quickly.
- Replace one panel instead of three. If only one section is damaged, replace one section. Reputable technicians will not push you into a full door replacement when a single panel solves the problem.
- Ask about a standard steel panel. If the door is an insulated model, an insulated panel is the right match. But if the door is non-insulated, stick with a standard steel panel and keep the cost down.
- Get a written quote before committing. A free estimate should be free, and the number should not change. Bramwell Garage Doors Marietta gives every customer a written price before any work begins. Call (912) 520-4208 for a free estimate; the quote is yours to keep.
A note on safety: garage door panels are heavy, and a panel on a door with high-tension torsion springs is not a casual DIY swap. The springs are under enormous tension, and mishandling them can cause serious injury. If any part of the job involves springs, cables, or lifting the door off its track, that is work for a trained technician with the right tools and experience.
What the Kingswell Guarantee Means for Panel Replacement
After more than two decades of garage door work, the Kingswell standard has refined itself down to a simple set of expectations. Every Bramwell location, including Marietta, is independently owned and operated, and every one has agreed to work to the same four promises:
- Written price before the work starts. Not a rough guess, not a “we’ll see.” A written number, handed to you before the first tool comes out.
- A real arrival window. You get a time, and the technician shows up in it. Background-checked and in uniform.
- A clean job site. The old panel leaves with the truck. No screws on the driveway, no packaging in the flower bed.
- A written guarantee. Every panel replacement includes the 365-Day Done Right Promise. If the repair fails within the guarantee period, Bramwell returns and corrects it at no charge. You do not have to argue for it. It is already in writing.
Since 2001, the Kingswell standard has been built for homeowners who have been burned by the alternatives: the tech who never called back, the quote that doubled at the door, the repair that failed in six weeks. Marietta homeowners have every right to expect better.
FAQs – Panel Replacement Cost
Is it cheaper to repair or replace a dented garage door panel?
Repairing or replacing a single dented panel in Marietta runs $250 – $500, while a full door replacement runs $700 – $2,200. If the door is in otherwise good shape and under roughly 15 years old, replacing the one panel is nearly always the cheaper option. Call (912) 520-4208 for a free estimate; Bramwell Garage Doors Marietta will give you written prices for both options so you can decide with real numbers in hand.
How much does it cost to replace a bottom panel on a garage door in Marietta?
A bottom panel replacement in Marietta costs $250 – $500, including the panel, labor, and disposal of the old panel. Bottom panels are the most commonly damaged because they sit closest to the driveway, but they are also where the lift cable anchors, so the technician should re-check cable tension and door balance as part of the job. Bramwell Garage Doors Marietta includes that balance check in the written quote, not as a surprise add-on.
How long does a garage door panel replacement take?
A single panel replacement usually takes one to two hours in Marietta, including removing the damaged panel, installing the new one, checking the balance, and cleaning up. If the panel must be ordered to match the door’s color and pattern, the wait for the panel may be a few days, but the installation itself is a same-day job. Bramwell Garage Doors Marietta schedules a real arrival window and the technician works until the job is done right.
Does homeowners insurance cover garage door panel replacement in Marietta?
Homeowners insurance may cover panel replacement if the damage was caused by a covered event, such as a vehicle hitting the door, a fallen tree limb, or storm damage. The typical payout is based on the repair estimate minus your deductible, and a single panel replacement at $250 – $500 often falls below the deductible. Check your policy first; Bramwell Garage Doors Marietta can provide a written estimate for your insurance claim at no charge.
Can a garage door panel be repaired instead of replaced?
Small dents can sometimes be worked out of a steel panel, but once a panel is cracked, rusted through, or creased at a hinge point, replacement is the reliable fix. In the Marietta market, a full panel replacement runs $250 – $500, which is less than the cost of letting a damaged panel stress the door’s hinges, rollers, and track over time. Call (912) 520-4208 and Bramwell Garage Doors Marietta will tell you honestly whether your panel is repairable or needs replacing.
Contact Bramwell Garage Doors Marietta for a Free Estimate
If you have a damaged garage door panel in Marietta, you do not have to guess at the cost. Call Bramwell Garage Doors Marietta at (912) 520-4208 and a live person will answer, 24 hours a day, seven days a week. We will schedule a free estimate, arrive within the stated window, and hand you a written price before any work begins. That price covers the panel, the labor, and the cleanup, and it is backed by the 365-Day Done Right Promise in writing. Whether you live in East Cobb, near the Square, or out toward Powder Springs, the same Kingswell standard applies: written price, real arrival window, clean job site, written guarantee.
Pricing reflects the Marietta market as of 2026. Bramwell Garage Doors Marietta offers free estimates – call (912) 520-4208.
Written by Marcus Ellery, Owner at Bramwell Garage Doors Marietta, serving Marietta since 2001.
What Our Customers Say
"Our opener finally died after 15 years. The tech walked me through two options with the prices written down before he touched anything, and didn't push the expensive one. New one's been perfect."
- Danielle P."Cable came off the drum and the door was crooked and scary looking. Fixed in under an hour. He showed me the worn part and explained what caused it so I'd know what to watch for."
- Jordan W."Door was loud enough to wake the neighbors. First visit quieted it but it crept back after a week, so they came out again and dialed it in for free. Second time did the trick."
- Darren Figueroa