Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterPanel Replacement in Marietta, GA
Garage door panel replacement in Marietta typically costs $150 to $500 per panel depending on the door material, panel size, and whether the damage is isolated or structural. Most single-panel replacements are finished the same day. If a bent or broken panel is throwing off the door’s balance, Bramwell Garage Doors Marietta gets it handled fast through our Garage Door Repair services, with a written price before any work begins. Call (912) 520-4208 and a live person answers, day or night.
We’re part of the Kingswell family of garage door companies, operating under the Kingswell standard since 2001. That means every panel replacement we do in Marietta follows the same four promises: a written price before any work starts, a real arrival window, a clean job site, and a written guarantee on the repair. If you’ve had a door serviced before by a company that changed the quote at the door or never showed, this is a different experience. It’s the reason homeowners call us after they’ve been burned. You can read more about the full scope of our work on our Garage Door Repair in Marietta page.
When You Need Panel Replacement
Most panel damage in Marietta shows up in predictable ways. Here’s what we see in neighborhoods across the city, from East Cobb to Kennesaw Avenue off Barrett Parkway:
- Impact cracks or holes from vehicles – a car bumper or bike handlebar hits the door, and the bottom panel splits or dents. In Marietta’s older subdivisions with short driveways, this is the most common panel damage we see.
- Dents that turned into cracks – what starts as a cosmetic ding from a basketball or lawn mower handle can weaken the metal or fiberglass, especially through humid Georgia summers and cold snaps that make materials contract.
- Bottom panel rot on wood doors – Marietta’s clay-heavy soil holds water after rain, and wood doors sitting close to a damp driveway wick moisture up into the bottom panel. We see this regularly in older homes around Whitlock Avenue and Powder Springs Street.
- A panel bent badly enough to jam the door – when a panel folds or twists, the rollers bind in the track and the door stops moving. Forcing the opener at that point can burn out the motor.
- Rust-through on steel doors – steel panels that weren’t repainted after years of pollen, rain, and sun exposure along the south-facing side of a Marietta home eventually rust through at the seams.
- Storm damage – spring thunderstorms with heavy hail or windborne branches can dent or crack panels beyond repair, especially on homes near Kennesaw Mountain where wind funnels through.
If the panel is the only problem, you don’t need a new door. If the door is older and the panels are failing in multiple places or the frame is pulling apart, we’ll tell you straight whether replacement makes more sense. We won’t sell you a new door when one panel fixes the issue.
Our Panel Replacement Process
Here is exactly how a panel replacement runs with us, start to finish:
- You call (912) 520-4208. A live person answers. No voicemail tree. You tell us what happened, and we ask a few questions: what material the door is, roughly how old it is, and whether it opens at all.
- We give you an arrival window, and we keep it. You’ll know when we’re coming, not a four-hour “sometime.” Our technician arrives in uniform, and he’s background-checked.
- We inspect the door and measure everything. The technician checks the panel dimensions, the door’s overall balance, the rollers, the hinges, and the cable tension. A damaged panel often means stress landed somewhere else too.
- You get a written price before any work starts. That’s the Kingswell Way. We say the price before we touch the door. The number on the invoice matches the number we quoted. No “found something else” surprises.
- We replace the panel, re-balance the door, and test it. The old panel comes out, the new one goes in, hinges and rollers get reattached, and we run the door through several full cycles to confirm it moves smoothly and sits level.
- We leave the job site clean and hand you the written guarantee. You’ll know exactly what the work covers and for how long. The 365-Day Done Right Promise means if the repair fails within a year, we come back and fix it at no charge. That commitment is in writing, not spoken.
Panel Replacement Pricing in Marietta
Most torsion-spring replacements run $150 to $280, parts and labor included. Panel work is different because the cost depends on what you’re matching. Here’s what to expect for panel replacement in Marietta:
| Door Type | Typical Per-Panel Range | Notes |
|---|---|---|
| Single steel panel, non-insulated | $150 to $250 | Most common for standard 16×7 builders’ doors |
| Steel panel, insulated | $200 to $350 | Thicker, needs to match existing insulation profile |
| Aluminum panel with glass insert | $250 to $450 | Glass lites add material cost and handling time |
| Wood panel (cedar or redwood) | $200 to $400 | Often requires milling to match original door profile |
| Fiberglass panel | $200 to $350 | Less common in Marietta; typically on newer doors |
What moves the number: the brand (Chamberlain, Genie, Clopay, and Amarr doors all have different panel gauges and profiles), the panel’s width and thickness, whether the finish needs site painting to match, and whether any adjoining hardware, like hinges or Roller Replacement parts, took damage when the panel was hit. We service all major brands, so matching a Clopay door from 2012 or a newer Amarr door is usually straightforward.
Every quote is free. Call (912) 520-4208, and you’ll get a written price before any work starts. No estimate is ever issued over the phone as a binding number, but we’ll give you an honest range at the first call so you know what to expect.
Why Homeowners in Marietta Call Bramwell
We know you’ve got choices for garage door work in Cobb County. Here’s what tilts it:
- Written price before any work starts. On every job, without exception. The number you hear is the number on the invoice.
- 365-Day Done Right Promise. If a covered repair fails inside the guarantee period, we come back and fix it at no charge. In writing.
- Live person answers the phone 24/7. Nights, weekends, holidays. You call, a person picks up.
- Background-checked, uniformed technicians. You know who’s pulling into your driveway.
- Our team has been serving homeowners under the Kingswell standard since 2001. That’s more than two decades of doors in Marietta.
Marcus Ellery owns and runs Bramwell Garage Doors Marietta. He’s the name behind the phone number. When you call, you’re talking to people who work in Marietta and know the homes here, from the ranches off Lower Roswell Road to the brick two-stories around Paper Mill Road.
FAQs – Panel Replacement
Can you replace just one panel on a garage door?
Yes, in most cases a single damaged panel can be replaced without buying a new door, as long as the door is structurally sound and the panel can be matched to the existing material, color, and profile. We’ll inspect the door and tell you honestly if one panel is enough or if the damage has spread. Call (912) 520-4208 and we’ll help you figure it out before you spend a dollar.
Is it cheaper to repair or replace a garage door panel?
Repairing a single panel in Marietta almost always costs less than a full replacement, typically $150 to $500 versus $1,200 or more for a new standard door. The exception is an older door with multiple damaged panels or a frame that’s out of square. We’ll give you the straight answer with a free inspection. Estimates are free, and the written price comes before any work starts.
How fast can you get to my home in Marietta for panel replacement?
We schedule most Marietta panel replacements within one to two days, and many single-panel jobs are finished the same day we arrive. Emergency calls for a door that won’t close go to the front of the line. Call (912) 520-4208 and we’ll give you a real arrival window on the phone.
Do you service major garage door brands?
Yes, we’re authorized to service all major brands including LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. Whether your door is a Clopay from the early 2000s or a newer Amarr, we can source the matching panel. Call (912) 520-4208 and tell us what’s on the door; we’ll confirm we can get the panel before we schedule.
Get Your Panel Replacement Started in Marietta
If a bent panel is keeping your door from closing, don’t force the opener. A door off balance from panel damage strains the Spring Repair components and the motor, and that turns a $200 fix into a $700 repair. You don’t need to live with a door that looks beat up, either. A single panel replaced cleanly restores the look of the whole door.
Call Bramwell Garage Doors Marietta at (912) 520-4208 for a free estimate. You’ll talk to a live person, get a real arrival window, and see a written price before any work starts. That’s the Kingswell Way, and it’s been our standard in Marietta since 2001. If the repair fails inside a year, we come back and fix it at no charge. In writing.
Written by Marcus Ellery, Owner at Bramwell Garage Doors Marietta, serving Marietta.