Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateTrusted Garage Door Repair for Marietta Homeowners
A garage door that won’t open, closes unevenly, or makes a grinding sound like rocks in a coffee can usually means one thing: a part has failed and the door is working against itself. That’s the moment most Marietta homeowners call us, often after a bad experience with another company. Bramwell Garage Doors Marietta has operated under the Kingswell standard since 2001, which means every technician shows up in a stated window, hands you a written price before touching a single bolt, and backs the repair with the 365-Day Done Right Promise. If it fails within the guarantee period, we return and fix it at no charge. Call (912) 520-4208 and a live person answers, 24 hours a day, 7 days a week.
Garage Door Sensor Repair
Sensor Calibration in Marietta fixes the photo-eye safety sensors mounted about six inches off the floor on either side of your door opening, and the most common symptom is a door that reverses immediately after touching the ground or refuses to close at all. A misaligned beam, a sun-struck lens in a west-facing Marietta driveway, or a pinched wire are the usual culprits. Our technicians diagnose the sensor circuit, realign the beam, replace damaged wire, or install new sensors when needed, with most repairs running $150 – $600 depending on whether it’s a realignment or a full replacement. Before any work starts, you get a written price that matches the final invoice.
Misaligned Sensor Beam
When the two photo-eye units fall out of alignment, the invisible infrared beam breaks and the opener thinks a child or pet is in the doorway. That’s a safety feature doing its job, not a broken motor. We restore alignment and test the beam with an obstruction check before declaring the job done.
Faulty Sensor Wiring
Marietta’s humid summers and temperature swings work on low-voltage wiring, especially where staples have nicked the jacket. A shorted sensor circuit can mimic a dead opener. We trace the run, replace the bad section, and re-staple the wire with proper standoffs so the problem doesn’t return next spring.
Styles & brands we work with
Emergency Garage Door Repair
Emergency Garage Door Repair covers the calls that can’t wait: a door stuck open with a vehicle inside, a spring that snapped and dropped the door crooked, or a cable that let go and left the door jammed against the track. We answer the phone live at 3 a.m. in Marietta and schedule a real arrival window for the same day. Emergency rates stay within the standard $150 – $600 repair range depending on the failed part, and you’ll know the exact number before we start. The technician arrives in uniform, background-checked, and carrying the most common springs, cables, and rollers on the truck.
Door Stuck Wide Open
A door that won’t close leaves your home exposed all night. We prioritize these calls because the issue is as much security as mechanics. The fix is usually a broken spring or a snapped cable, and we carry replacement parts for all major brands on the truck.
Door Off the Track
When a roller jumps the track, the door can bind hard enough to bend panels if you keep pushing the opener button. That’s a stop-and-call situation. We reset the rollers, inspect the track for damage, and rebalance the door so it doesn’t happen again the next time the humidity shifts.
Garage Door Panel Replacement
Panel Replacement addresses a bottom panel that’s dented from a bumper kiss or rotted from years of storm splash against a Marietta driveway, or a middle panel cracked after a kid’s basketball hit just right. Replacing a panel is faster and cheaper than a full door, provided the rest of the door is structurally sound. In Marietta, a panel replacement typically runs $250 – $500 per panel including installation, and we match the panel to your existing door as closely as the manufacturer’s current offerings allow. You get a written price before we order anything.
Rotted Bottom Panel
Water sitting against a wooden door’s bottom section is the classic Georgia failure, and once rot starts, the panel’s structural value is gone. We remove the old section, check the lower track and weatherstripping, and install a fresh panel before resealing the bottom edge. On newer doors we can often match steel or aluminum instead of wood for better longevity.
Cracked or Dented Middle Panel
A dent is cosmetic until the metal kinks, and then the panel can bind against the track on the way up. We assess whether the crack is isolated or already torquing the adjoining panels. Replacement is usually a one-day job once the panel arrives at our Marietta shop.
Garage Door Maintenance
Garage Door Maintenance is the scheduled service that catches a failing part before it becomes a 7 a.m. emergency with the door stuck halfway. Our maintenance visit includes tension balance testing, roller and hinge inspection, track lubrication, safety sensor verification, and a full hardware tightening on every bolt from top bracket to bottom bracket. Most Marietta homeowners schedule this once a year, and a service visit runs $150 – $600 depending on what we find and whether small parts need replacing. We always hand you the written price before making any repair recommendation, so maintenance never feels like an upsell.
Annual Tune-Up Checklist
We work through a 26-point checklist that covers the opener’s force settings, the spring’s balance, the cable condition, and the limit switch travel. Georgia’s heat and humidity work on metal and lubricant year-round, so once a year is the right interval for most homes. You’ll get a written summary of what’s healthy and what’s getting tired.
Lubrication and Track Care
A loud door is usually a dry door, and a dry door wears rollers and hinges faster than it should. We use the factory-recommended lubricant for each brand rather than a one-size-fits-all spray, and we clean the tracks without bending them. Straight track plus proper lubrication is the cheapest longevity insurance a garage door can get.
Garage Door Roller Replacement
Roller Replacement swaps out the small wheels that guide your door up and down the track, and the job is necessary when you hear grinding, see flat spots on the wheels, or catch the door shimmying side-to-side on its way up. Nylon rollers with sealed bearings are the modern standard and they run quieter than the old steel ones. In Marietta, roller replacement runs $110 – $220 for a full set on a standard two-car door, parts and labor included, with the written price handed to you before we start. Worn rollers left alone will eventually scar the track, which is a more expensive fix.
Noise and Vibration
When rollers get flat spots or the bearings go dry, every cycle sends vibration through the door sections and into the opener rail. That’s the rattle you hear from inside the kitchen. Replacing all rollers at once restores smooth travel and quiets the whole system.
Binding and Shimmy
A door that wobbles side to side is usually riding on rollers of different diameters or rollers with worn bearing seats. The fix levels the door, extends the life of the sections, and keeps the limit switch from tripping early. We replace rollers as a matched set so the door tracks straight again.
Commercial Garage Door Repair
Commercial Garage Door Repair serves Marietta’s warehouse and storefront doors that cycle dozens of times daily, which means heavier springs, bigger panels, and no patience for downtime. We service sectional and rolling steel doors at the same written-price standard that protects our residential customers, and the $150 – $600 range for most repairs is dictated by the number of cycles the door sees and whether the springs are standard or high-cycle. Every commercial repair includes the 365-Day Done Right Promise in writing. Your morning shift doesn’t wait while someone gives you a verbal ballpark that changes at the invoice.
High-Cycle Spring Systems
Standard torsions are rated for 10,000 cycles, but a busy loading bay can burn through that in three years. We install and service high-cycle springs rated for 25,000 to 50,000 cycles, which are the right call for any door that opens more than 20 times a day. The parts cost more; the downtime doesn’t.
Dock Door and Overhead Sectional Service
Loading dock doors take the hardest abuse: forklift contact, weather, and constant motion. We handle panel replacement, track realignment, and opener repair on both rolling steel and sectional dock doors. Scheduling is flexible around your operation hours, and we work with a written price agreed before the first tool comes off the truck.
Garage Door Cable Repair
Garage Door Cable Repair addresses the steel cables running from the bottom brackets up to the torsion spring drum, and these cables carry the full weight of the door every single cycle. A frayed cable can snap without warning and drop one side of the door violently, which is when a homeowner sees the door crooked and jammed. Cable repair in Marietta runs $130 – $250 including the parts and the re-tensioning work, and we replace cables in pairs because the second one has the same amount of wear as the first. Let a technician handle this one; the stored tension in the spring system is genuinely dangerous.
Fraying and Rust
Visible strands poking out from the cable’s outer wrapping mean the cable is already weaker than its rated capacity, and that’s a countdown, not a maintenance item. Our technicians inspect the drum, the bottom bracket, and the roller condition at the same time, because one bad component usually accelerates the others. The replacements get re-tensioned to the exact manufacturer spec for your door weight and spring size.
Broken Lift Cable
When a cable breaks, the door hangs crooked in the track and the panels can twist under their own weight. Stop using the opener immediately and call us. We’ll secure the door, replace both cables, and rebalance the spring tension so the opener isn’t fighting a heavy door on one side and a light one on the other.
Brands We Service
We’re authorized to service all major brands, and our technicians work on Chamberlain and Genie openers every week. Chamberlain units are the most common in Marietta garages and we know their gear assemblies, limit switches, and traveler modules down to the revision level. Genie’s screw-drive models are another regular in the area, and we keep the trolley assemblies and carriage parts on the truck for same-day fixes.
On the door side, Clopay and Amarr steel doors are everywhere in Marietta’s subdivisions from East Cobb to Powder Springs. We match Clopay’s panel profiles and stock their common hinge and bracket hardware, and for Amarr we carry the roller carriers and strut dimensions that make a panel replacement blend correctly. Whether you have those brands or any other make, we can diagnose it, price it, and fix it under the same written guarantee.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- The door only opens a foot and stops. That’s usually a broken torsion spring, and the opener’s force limiter is cutting power because the door suddenly weighs too much. Continuing to press the button can burn out the opener motor on top of the broken spring.
- You hear a gunshot sound from the garage. A snapped spring sounds exactly like that, and the door will be dangerous to lift by hand until the spring is replaced. Stop using the opener, leave the door where it is, and call a repair technician.
- The cables are visibly frayed or hanging loose. A cable with broken strands is about to fail, and when it does, the door can drop suddenly. Loose cable means the drum has unwound, which puts the entire lifting system out of balance.
- The door reverses before hitting the floor. That’s the safety sensor system interrupting the close cycle, usually from misalignment or a dirty lens. If cleaning the lens doesn’t fix it, the beam itself or the wiring needs a pro’s attention.
- The door is crooked in the tracks. A door that’s higher on one side than the other is likely off balance from a failing spring or a broken cable. Running the opener with the door cocked will bend tracks and crack panels.
Our Process, Step by Step
- 1
You call and a live person answers. No phone tree, no hold music, no voicemail at 2 a.m. on a Sunday. We take the details of what the door is doing, schedule a real arrival window that works for your day, and confirm the address.
- 2
The technician arrives in uniform. Every Bramwell technician is background-checked and wears a company uniform and ID. You’ll know exactly who’s in your driveway before you open the door. The truck carries the most common springs, cables, rollers, sensors, and openers for the brands we service.
- 3
We diagnose and hand you a written price. The technician inspects the door, explains what failed and what the options are, and writes the price down on the quote sheet. That number does not change during the job. If you don’t like it, there’s no charge for the visit.
- 4
We do the work and test everything. Every repair is tested through full open and close cycles with the force settings checked against manufacturer specifications. We rebalance the door, test the safety sensors, and run the opener through its full travel before we pack up.
- 5
We leave the garage cleaner than we found it. Old parts go in the truck, not on your floor. We sweep the work area, and then we walk you through what we did and hand you the written 365-Day Done Right Promise. That’s the Kingswell standard, and it’s on paper every time.
How Much Does Garage Door Repair Cost in Marietta?
Most garage door repairs in Marietta fall between $150 and $600, with the exact number driven by the part and the labor involved. A snapped torsion spring runs $180 – $340 with parts and labor included. A broken cable is $130 – $250. An opener that won’t run or won’t reverse costs $120 – $320 to diagnose and repair. A dented or rotten panel runs $250 – $500. Roller replacement is $110 – $220, and track realignment runs $120 – $240. If it’s easier to replace than repair, a new opener installed runs $250 – $550 and a new door runs $700 – $2,200 depending on size, material, and insulation.
What changes the price is the door’s weight and cycle history, the brand of the parts, and whether the failure was caught early or left to compound. A garage door that ran for six weeks with one broken spring always costs more than one that was fixed the day it broke. The best way to avoid overpaying is to get a written price before the work starts, which is exactly how the Kingswell Guarantee works. The free estimate includes the diagnostic, the repair quote, and our recommendation on whether anything else on the door is getting tired enough to plan for.
Every price on this page is the price we stand behind. The invoice matches the quote. If a covered repair fails inside a year, the 365-Day Done Right Promise brings us back to fix it at no charge. That promise is in writing, on every job, not just said at the door.
Our Service Area Near Marietta
Bramwell Garage Doors Marietta serves homeowners across Cobb County and the surrounding communities, including Dallas, Roswell, Smyrna, Kennesaw, Vinings, Mableton, and Acworth. East Cobb neighborhoods near the Chattahoochee and the commercial corridors along Powers Ferry Road are both regular territory for our trucks. Same-day and emergency calls are typically dispatched within the hour for Marietta zip codes, with surrounding areas scheduled in the same real arrival window we quote on the phone. You can learn more about our service areas on the home page, or see how we handle jobs in Garage Door Repair in Dallas and Garage Door Repair in Roswell.
Serving Marietta, GA - Our Local Coverage Area
We’re based in the Marietta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Garage Door Repair in Marietta
Garage door repair is the diagnosis and replacement of any component that has failed on your door or opener: springs, cables, rollers, panels, track, hinges, sensors, or the opener’s motor and gear assembly. The work is done by a technician who carries the parts on the truck and completes most repairs the same day. In Marietta, Bramwell technicians hand you a written price before any work starts.
Most repairs take 45 to 90 minutes from the time the technician starts working. A torsion spring replacement or a cable replacement is usually under an hour. Panel replacement may take slightly longer while the technician removes the old section and seats the new one, but most jobs are finished in a single visit.
Most garage door repairs in Marietta cost between $150 and $600 depending on the part that failed and the door’s history. A spring replacement runs $180 – $340, a cable replacement $130 – $250, and a full door replacement $700 – $2,200. You’ll get a written price before we begin, so the number you hear is the number you pay. Call (912) 520-4208 for a free estimate.
Yes, we’re authorized to service Chamberlain, Genie, LiftMaster, Craftsman, and every other major opener brand. Our trucks carry common Chamberlain and Genie parts so most opener repairs are completed same-day. The brand of your opener doesn’t change our written-price or written-guarantee policies.
Yes, we answer the phone live 24 hours a day, 7 days a week, including nights, weekends, and holidays. Emergency calls are scheduled with a real arrival window the same day, and the technician arrives with the parts to fix the most common failures on the spot. Call (912) 520-4208 any time and a person will pick up.
Every repair is protected by the 365-Day Done Right Promise and the written Kingswell Guarantee. If a covered repair fails inside the guarantee period, we return and correct it at no charge. The guarantee is given to you in writing on every job, so the commitment isn’t just spoken at the door.
Clear the area inside the garage so the technician has room to work around the tracks and the opener, and move any vehicles out before the arrival window starts. If you can, test the door once and note what it does so you can describe it accurately. You don’t need to have anything disassembled; we’ll handle everything from there.
Schedule Your Garage Door Repair Service in Marietta Today
A broken garage door doesn’t heal itself, and every open-close cycle makes the damage worse. Call (912) 520-4208 and talk to a live person who’ll schedule your repair in a real arrival window, give you a written price before the work starts, and back the whole job with the 365-Day Done Right Promise. We’re Marietta’s garage door repair team, ready 24/7. Call now for a free estimate.
Written by Marcus Ellery, Owner at Bramwell Garage Doors Marietta, serving Marietta since 2001.